SHJZ-1000VA
ShunHong
W10003
Availability: | |
---|---|
Quantity: | |
Product Advantage
Technical Parameters
Product Model | SHJZ-1000VA |
Product name | 1000W Temperature Control Protection Voltage Converter 220V to 100V |
Maximum applicable power | 1000W* |
Rated Input Voltage | 220V~ |
Rated output voltage | 100V~ |
Rated capacity | 800VA* |
Rated Frequency | 50/60Hz |
Operating cycle | 30/60min |
sizes | 20*16*9.5cm |
Size (with package) | 30*20*15cm |
weights | 4.6kg |
Weight (with package) | 5.0kg |
Type | Dry-type |
Safety Device-1 | Temperature Control |
Automatic power-off temperature | ≥80℃ |
Power cord square | 1 square |
Maximum Passing Current | 8A |
Materials | Aluminum wire winding |
Core material | Ring transformer |
certificate | CE、FCC Etc. |
Product Uses
Product Operate Guide
Precautions for the use of voltage transformer
1, Waterproof and moisture-proof:
As this voltage converter is designed to pass through the internal core accessories, in order to achieve good heat dissipation, its shell is not a large area of waterproof treatment. Therefore, it should be used away from water sources to prevent water intrusion into the internal voltage converter, so as not to cause a short circuit or other safety incidents.
2, Heat dissipation and ventilation:
Voltage converter may produce a certain amount of heat during operation, which is a normal phenomenon. In order to maintain its normal operating temperature, should not block the transformer left and right sides of the cooling holes to ensure air circulation to help dissipate heat. If the power transformer is found to be abnormally hot or emit a burning odour during use, it should be stopped immediately and a professional should be consulted.
3, Boot check:
Before the first boot use, the power transformer should be fully inspected. Ensure that the appearance of the machine is complete and undamaged, and the parts are fixed firmly. At the same time, the first boot should pay attention to whether there is a strange noise or abnormalities, if any should immediately stop the machine to check.
Power transformer use process:
1、 Check whether the appearance of the voltage converter is complete and spare parts are fixed;
2、Connect the voltage converter input plug to the voltage 220V power supply;
3、Click the machine switch key, the voltage converter will be energised;
4、 The 100V electrical appliances connected to the voltage converter, and then switch on the normal use can be.
FAQ